Spray Heads

Spray heads deliver even, close-range coverage for turf and planting beds. Build reliable zones with pop-up bodies in multiple heights, pressure-regulated (PRS) options to reduce misting, and check-valve (SAM) models to stop low-head drainage—then finish with the right nozzles for each area.

Shop by need

• Pop-up bodies: common heights 2", 3", 4", 6", and 12" for grass, groundcover, and shrubs
• Performance features: PRS (pressure regulation), SAM (check valve), side-inlet bodies, rugged/contractor grades
• Nozzles: adjustable-arc, fixed matched-precipitation, strips/corners, bubblers; high-efficiency rotating options (model dependent)
• Accessories: risers, swing joints, filters, caps, and service tools

Quick choosing guide

1. Pick height: 4" for most turf; 6–12" to clear taller grass, groundcover, or uneven grades.
2. Control pressure: choose PRS bodies to cut misting/overspray where supply pressure runs high.
3. Stop puddles: select SAM check-valve models on slopes or where laterals drain down.
4. Match the nozzle: adjustable for odd shapes, fixed MPR for balanced watering, strip/corner along walks and narrow beds; confirm the nozzle thread type matches the body.
5. Space head-to-head: set radius so each head reaches the next for uniform coverage.
6. Use side inlets: helpful where bottom clearance is tight or along hardscape.