Well Lights

Well lights (in-ground uplights) create dramatic accents on trees, columns, facades, and garden features—while staying out of sight. Choose 12V low-voltage fixtures with integrated LED or lamp-ready designs in tough, outdoor-rated housings.

Shop by need

• Light source: integrated LED or lamp-ready MR16/PAR36
• Beams & optics: narrow spot for tall trees/statues, flood for walls; clear or frosted lenses; optional hex louvers
• Adjustability: fixed or gimballing/tilt modules to aim past branches or eaves
• Housings: PVC/composite wells, brass or stainless trims/rings, grate/rock-guard options
• Ratings: wet-location/IP-rated; select drive-over or walk-over where traffic demands it
• Accessories: burial sleeves, drain bases, glare shields, replacement lenses, gel-filled connectors

Quick choosing guide

1. Pick the lamp type: MR16 for compact fixtures and flexible beams; PAR36 for higher punch and wide floods.
2. Choose the beam: 10–25° to push light up trunks/columns; 36–60° to wash canopies and walls.
3. Select the trim & rating: open trim for max output; louvered/grate for glare control. Verify drive-over if placing in paving/driveways.
4. Plan drainage: set the well on gravel with a drain outlet or drywell—standing water kills fixtures.
5. Power & wiring: size the 12V transformer for total watts + ~20% headroom; use proper cable gauge to keep farthest fixtures near 11–12V.