DIG Irrigation P13-200 3/4 MNPT Plastic Screen Filters, w/ Stainless Steel Screen & Flush Valve, 200 Mesh

DIG’s heavy-duty plastic screen filters with pipe thread are commonly used in residential and commercial installations to protect a drip irrigation system from debris that might enter the line and cause blockage of the emitters. The low maintenance, inexpensive screen filters provide reliable and trouble-free operation by removing fine sand and other particles that could otherwise block the small water passages of the drip and micro sprinklers.

Features

• All-purpose filter with a wide range of polyester and stainless-steel screens from 180 to 80 micron to suit a wide range of filtration requirements
• Screens have excellent resistance to most common chemicals
• Color-coded replacement screens for easy identification
• Large filter area and low friction loss allows long intervals between cleaning
• Available with flush cap or flush valve for easy flushing of particles trapped in the bottom of filter.
• Recommended to be installed and used after the control valve.
• Easy maintenance – the screen can be extracted from the filter for easy cleaning
• Interchangeable screen and disc elements
• Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions

Specifications

• Flow rates:
  • 3/4" up to 13 GPM (3.5 m3/h)
  • 1" up to 18 GPM (4.9 m3/h)
• Screen filtration area: 14.9 sq inch (96 cm2)
• Operating pressure: up to 120 PSI (8.4 BAR)
• Temperature range: up to 130°F (54°C)
• Stainless steel and polyester screens from 80 to 200 mesh
• Inlet and outlet size:
  • 3/4" or 1" MNPT with 3/4" FHT cap
  • 3/4" or 1" MNPT with 3/4" FHT flush valve
• Materials:
  • Housing: polypropylene
  • O-ring: EPDM
  • Pressure testing port: polypropylene
  • Pressure testing seals: natural rubber BR

Flow rates:
3/4" up to 13 GPM (3.5 m3/h)
1" up to 18 GPM (4.9 m3/h)
Screen filtration area: 14.9 sq inch (96 cm2)
Operating pressure: up to 120 PSI (8.4 BAR)
Temperature range: up to 130°F (54°C)
Stainless steel and polyester screens from 80 to 200 mesh
Inlet and outlet size:
3/4" or 1" MNPT with 3/4" FHT cap
3/4" or 1" MNPT with 3/4" FHT flush valve