DIG Irrigation 305DC-150 11/2" Globe Valve with Latching Solenoid (6-12 volt) with Flow Control

DIG’s 305DC-150 and 200 series plastic inline globe valves with a 6-12 VDC, two-way magnetic latching solenoid range from 1 1/2” to 2” and operate with DIG’s battery operated controllers and LEIT 2 ET solar powered controller. The globe valves use an encapsulated, watertight, two-way magnetic latching solenoid that requires minimal power to operate. The 305DC-150 and 200 are heavy-duty control valves constructed of weather-resistant, glass-reinforced nylon and a stainless steel spring to provide superior hydraulic performance with balanced opening and closing at a pressure rate of up to 150 PSI.

Features

• Constructed of glass-reinforced nylon with a stainless steel spring; non-corrosive materials
• High flow with low pressure loss
• Normally closed
• Easy inline maintenance
• Smooth valve opening and closing prevents pressure surge hazards
• Rugged, reinforced self-cleaning diaphragm provides reliable operation even with contaminated water
• Flow control handle for water flow adjustment and manual shutoff
• Manual internal bleed override via the solenoid

Specifications

• Type: globe valve with two-way magnetic latching solenoid
• Operating pressure: 10 to 150 PSI, (.7 to 10.5 bar)
• Body style: globe
• 1.5" and 2" NPT or BSP female inlet and outlet
• Operating flow range:
  • 1.5": 20 to 132 GPM (4.5 to 30 m3h)
  • 2": 30 to 160 GPM (6.8 to 36 m3h)
• Solenoid: 6-12 VDC, two-way magnetic latching, normally closed, bidirectional pulse
  • Voltage rate: 6 -12 VDC
  • Coil Resistance: 4.7Ω +/- 0.3
  • Pulse Width: minimum 10 mSec
• Operation mode:
  • Red + and white – latch to open
  • Red – and white + released to closed
• Control orifice: 0.65 +/- 0.0002 (1.7 mm)
• Lead wires: 18” (45 cm) UL 1015, AWG 16, 300V - red and white wires
• Temperature range: up to 150 Fahrenheit (0-65 C)