Franklin Electric 2W (1/2HP,230,60,W) #2445059004GS FPS 4" Submersible Motor

Install Manual

Franklin Electric 2W (1/2HP,230,60,W)  #2445059004GS FPS 4" Submersible Motor, 1-phase, 2-wire, 1/2hp, 230v, 60 Hz, Water Well Construction

The standard Schaefer Series V submersible pump features unique hydraulics that improve efficiency and minimize wear even when pumping abrasives. Discharge and motor brackets are available in thermoplastic or stainless steel with a removable check valve system. Available in 5, 7, 10, 15, 20, and 25 gpm, 1/2 - 5 horsepower. For details on how to become a registered dealer and receive a 5-year warranty, contact your local distributor.

• 6 performance ranges: 5, 7, 10, 15, 20, and 25 gpm.
• Horsepower ranges: 1/2 - 5.
• Discharge head and motor bracket produced with industry proven, engineered materials. Available in 300 series stainless steel or high quality thermoplastic resins.
• Large wrench flat area on the discharge head for ease of installation.
• Dry run designed top bearing positively supports the 300 series stainless steel 7/16-inch hex shaft.
• Removable internal check valve.
• Powered by Franklin Electric corrosion-resistant super stainless 4-inch submersible motors with lightning protection.
• Maximum water temperature with proper flow is 120 °F/49 °C. Consult factory for details.

HP 1/2 hp
Frequency 60 Hz
Phases Single-Phase
Amps - Full Load 5 A
Amps - Service Factor 6 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 2-Wire
Lead Length 4 ft
Motor Submersible
Continuous Duty Yes
Efficiency [η] - Full Load (%) 56.00
Efficiency Service Factor Load [%] 60.00 %
Protection [IP] IP68
Lead Wire Size AWG #14
Lead Retainer Method Lead Jam Nut
Motor Efficiency 56.0
Motor Insulation Classification B
Poles 2
S.F. 1.6
Lead Yes
Motor Cooling Water
Minimum Cooling Flow >0.00 ft/sec
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating @ 89 F, 30 C 300 lb
Rotation Counter clockwise facing the shaft

Motor Diameter - Physical Diameter 95.25 mm
Motor Length 9.51 "
Product Weight 19 lb
Product Weight with Pack 18 lb
Carton Length 14.5 "
Shaft Diameter 0.61 "
Shaft End Spline