Skip to content
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376

Irrigation Supplies

Irrigation supplies to build, repair, and upgrade any sprinkler or drip system. Shop controllers, valves, sprinklers/rotors, dripline & emitters, backflow protection, pipe & fittings, filters/regulators, wire, and tools—everything you need from one place.

Shop by category

  • Controllers & sensors: smart Wi-Fi and standard timers, rain/freeze/flow sensors
  • Valves & manifolds: inline, anti-siphon, jar-top, solenoids & repair parts
  • Sprinklers & nozzles: sprays, rotors, high-efficiency nozzles, risers
  • Drip irrigation: 17mm dripline, 1/2" & 1/4" tubing, emitters, micro-sprays, fittings
  • Backflow prevention: PVB, RPZ, DC assemblies, test kits & covers
  • Pipe & fittings: PVC & poly, tees/elbows/adapters, swing joints
  • Filtration & regulation: screen/disc filters, 25–30 PSI regulators for drip
  • Wire & electrical: control cable, two-wire, waterproof connectors
  • Tools & repair: stakes, clamps, cement & primer, winterization gear

Quick planning tips

  1. Verify water: note static pressure and available flow (GPM) before sizing pipe/heads.
  2. Zone by plant needs: turf with sprays/rotors; beds, trees, and planters with drip.
  3. Protect the system: add the required backflow device; use filters & pressure regulation on drip.
  4. Build for service: label zones, use valve boxes, and choose fittings that match your pipe & thread type.

Use filters to narrow by brand, category, size, connection, and feature. Orders ship fast from Big Frog Supply—need help speccing a parts list? Just ask.

  •

    DIG Irrigation - 16-022 - Goof plug : Strip of 10

    DIG Irrigation
    $ 0.40
    $ 0.40 - $ 0.40
    $ 0.40
    $ 0.24
    $ 0.24 - $ 0.24
    $ 0.24

    Use to plug holes in main line or to stop flow out of the end of 1/4 distribution tubing.

    $ 0.40
    $ 0.40 - $ 0.40
    $ 0.40
    $ 0.24
    $ 0.24 - $ 0.24
    $ 0.24
  • Sold out

    DIG Irrigation - S-305DC 6 - 12 VDC Solenoid with 11/16" -12 UN Thread

    DIG Irrigation
    $ 20.12 - $ 20.12
    $ 20.12
    $ 20.12 - $ 20.12
    $ 20.12

    DIG’s S-305DC is an encapsulated, watertight, two-way magnetic latching solenoid that requires minimal power to operate. The S-305DC is used with D...

    View full details
    $ 20.12 - $ 20.12
    $ 20.12
    $ 20.12 - $ 20.12
    $ 20.12
    Sold out

  • DIG Irrigation - 15-047 - 1/2" 17mm Elbow Male Adapter X Barb

    DIG Irrigation
    $ 0.48 - $ 0.48
    $ 0.48
    $ 0.48 - $ 0.48
    $ 0.48

    DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

    View full details
    $ 0.48 - $ 0.48
    $ 0.48
    $ 0.48 - $ 0.48
    $ 0.48
  • Sold out

    DIG Irrigation - 15-040 - 1/2" 17 mm Barbed Fittings Insert Coupling

    DIG Irrigation
    $ 0.31 - $ 0.31
    $ 0.31
    $ 0.31 - $ 0.31
    $ 0.31

    DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

    View full details
    $ 0.31 - $ 0.31
    $ 0.31
    $ 0.31 - $ 0.31
    $ 0.31
    Sold out

  • DIG Irrigation - 25-002 - 1/4 Barbed Fitting Tee

    DIG Irrigation
    $ 0.10 - $ 0.10
    $ 0.10
    $ 0.10 - $ 0.10
    $ 0.10

    The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

    View full details
    $ 0.10 - $ 0.10
    $ 0.10
    $ 0.10 - $ 0.10
    $ 0.10

  • DIG Irrigation - 06-019 - Button Drip Emitters, 0.5 GPH

    DIG Irrigation
    $ 0.24 - $ 0.24
    $ 0.24
    $ 0.24 - $ 0.24
    $ 0.24

    The Button Drip Emitters utilize a unique labyrinth flow path design, producing a turbulent flow for consistent operation with less chance of clogg...

    View full details
    $ 0.24 - $ 0.24
    $ 0.24
    $ 0.24 - $ 0.24
    $ 0.24
  • Sold out

    DIG Irrigation - 25-001 - 1/4 Barbed Fittings Long Barb

    DIG Irrigation
    $ 0.08 - $ 0.08
    $ 0.08
    $ 0.08 - $ 0.08
    $ 0.08

    The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

    View full details
    $ 0.08 - $ 0.08
    $ 0.08
    $ 0.08 - $ 0.08
    $ 0.08
    Sold out

  • DIG Irrigation - 16-007 - Shut Off Valve with 1/4 in. Barb

    DIG Irrigation
    $ 0.86 - $ 0.86
    $ 0.86
    $ 0.86 - $ 0.86
    $ 0.86

    DIG’s range of 1/4, 1/2 and 3/4 barbed and threaded shut-off valves are used for manual control of individual drip-line laterals, drip tubing or mi...

    View full details
    $ 0.86 - $ 0.86
    $ 0.86
    $ 0.86 - $ 0.86
    $ 0.86
  • Sold out

    DIG Irrigation - 06-012 - Adjustable Drip Emitters, 0-10 GPH 360° on Stake

    DIG Irrigation
    $ 0.65 - $ 0.65
    $ 0.65
    $ 0.65 - $ 0.65
    $ 0.65

    DIG’s 180° and 360° adjustable drip emitters are available with a barb or spike and have a flow dial enabling the flow to be adjustable between 0 t...

    View full details
    $ 0.65 - $ 0.65
    $ 0.65
    $ 0.65 - $ 0.65
    $ 0.65
    Sold out

  • DIG Irrigation - 15-041 - 1/2" 17 mm Barbed Fittings Insert Tee

    DIG Irrigation
    $ 0.42 - $ 0.42
    $ 0.42
    $ 0.42 - $ 0.42
    $ 0.42

    DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

    View full details
    $ 0.42 - $ 0.42
    $ 0.42
    $ 0.42 - $ 0.42
    $ 0.42

  • DIG Irrigation - 16-032 - 1/2 in. Heavy Duty Stake

    DIG Irrigation
    $ 0.36
    $ 0.36 - $ 0.36
    $ 0.36
    $ 0.22
    $ 0.22 - $ 0.22
    $ 0.22

    Features High-impact plastic UV-resistant Stake with flow adjustment available with 10/32 thread Flow rate on stake is adjustable to off For secur...

    View full details
    $ 0.36
    $ 0.36 - $ 0.36
    $ 0.36
    $ 0.22
    $ 0.22 - $ 0.22
    $ 0.22

  • DIG Irrigation - 07-062-B05 - A-jet, 180° Adjustable Spray Jet, Threaded Barb, Bag of 5

    DIG Irrigation
    $ 7.21 - $ 7.21
    $ 7.21
    $ 7.21 - $ 7.21
    $ 7.21

    The A-Jet adjustable micro sprayers incorporate an adjustable micro valve that allows control of flow and diameter to reduce or increase the wettin...

    View full details
    $ 7.21 - $ 7.21
    $ 7.21
    $ 7.21 - $ 7.21
    $ 7.21

  • DIG Irrigation - 16-003 - Swivel Adapter 3/4 in. FHT x MNPT w/ Washer

    DIG Irrigation
    $ 1.02 - $ 1.02
    $ 1.02
    $ 1.02 - $ 1.02
    $ 1.02

    DIG’s line of threaded fittings consists of hose and pipe thread adapters and caps with male or female threads. Features Hose or pipe thread with ...

    View full details
    $ 1.02 - $ 1.02
    $ 1.02
    $ 1.02 - $ 1.02
    $ 1.02

  • DIG Irrigation - 24-003 - .620 OD Tee Compression x Compression

    DIG Irrigation
    $ 0.89 - $ 0.89
    $ 0.89
    $ 0.89 - $ 0.89
    $ 0.89

    Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are able to fit a range of polyethylene drip tubing an...

    View full details
    $ 0.89 - $ 0.89
    $ 0.89
    $ 0.89 - $ 0.89
    $ 0.89
  • Sold out

    DIG Irrigation - 16-057 - 1/2 in. x 8 in. Galvanized Steel Wire

    DIG Irrigation
    $ 0.15 - $ 0.15
    $ 0.15
    $ 0.15 - $ 0.15
    $ 0.15

    Features High-impact plastic UV-resistant Stake with flow adjustment available with 10/32 thread Flow rate on stake is adjustable to off For secur...

    View full details
    $ 0.15 - $ 0.15
    $ 0.15
    $ 0.15 - $ 0.15
    $ 0.15
    Sold out

  • DIG Irrigation - ML-206 - 250' Microline Dripline, 6" Spacing

    DIG Irrigation
    $ 36.45 - $ 36.45
    $ 36.45
    $ 36.45 - $ 36.45
    $ 36.45

    DIG 1/4” Microline™ Dripline is a versatile and flexible, UV-protected small-diameter dripline that is suitable for a wide range of irrigation appl...

    View full details
    $ 36.45 - $ 36.45
    $ 36.45
    $ 36.45 - $ 36.45
    $ 36.45

  • DIG Irrigation - 15-046 - 1/2" Male Adapter x 17 mm Barb Insert Connector

    DIG Irrigation
    $ 0.51 - $ 0.51
    $ 0.51
    $ 0.51 - $ 0.51
    $ 0.51

    DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

    View full details
    $ 0.51 - $ 0.51
    $ 0.51
    $ 0.51 - $ 0.51
    $ 0.51

  • DIG Irrigation - 15-042-B05 - 1/2" 17 mm Insert Elbow, Bag of 5

    DIG Irrigation
    $ 4.24 - $ 4.24
    $ 4.24
    $ 4.24 - $ 4.24
    $ 4.24

    DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

    View full details
    $ 4.24 - $ 4.24
    $ 4.24
    $ 4.24 - $ 4.24
    $ 4.24

  • DIG Irrigation - 24-005 - .620 OD x 3/4 in. FHT End Cap

    DIG Irrigation
    $ 0.83 - $ 0.83
    $ 0.83
    $ 0.83 - $ 0.83
    $ 0.83

    Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are able to fit a range of polyethylene drip tubing an...

    View full details
    $ 0.83 - $ 0.83
    $ 0.83
    $ 0.83 - $ 0.83
    $ 0.83

  • DIG Irrigation - 24-035 - .710 OD x 1/2 in. MPT Adapter

    DIG Irrigation
    $ 0.58 - $ 0.58
    $ 0.58
    $ 0.58 - $ 0.58
    $ 0.58

    Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are able to fit a range of polyethylene drip tubing an...

    View full details
    $ 0.58 - $ 0.58
    $ 0.58
    $ 0.58 - $ 0.58
    $ 0.58

  • DIG Irrigation - 15-009 - .700 OD x .620 OD Reducing Coupling

    DIG Irrigation
    $ 0.54 - $ 0.54
    $ 0.54
    $ 0.54 - $ 0.54
    $ 0.54

    Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are able to fit a range of polyethylene drip tubing an...

    View full details
    $ 0.54 - $ 0.54
    $ 0.54
    $ 0.54 - $ 0.54
    $ 0.54

  • DIG Irrigation - 16-056 - 1/4 in. x 5 in. Galvanized Steel Wire

    DIG Irrigation
    $ 0.11 - $ 0.11
    $ 0.11
    $ 0.11 - $ 0.11
    $ 0.11

    Features High-impact plastic UV-resistant Stake with flow adjustment available with 10/32 thread Flow rate on stake is adjustable to off For secur...

    View full details
    $ 0.11 - $ 0.11
    $ 0.11
    $ 0.11 - $ 0.11
    $ 0.11

  • DIG Irrigation - 07-024 - Micro Spray Jets, 180°, Spray Jet Assembly

    DIG Irrigation
    $ 1.18 - $ 1.18
    $ 1.18
    $ 1.18 - $ 1.18
    $ 1.18

    DIG’s Micro Sprayers are available in 90°, 180° and 360° spray patterns with a flow rate of up to14.7 gallons per hour at 30 PSI. Producing a fine ...

    View full details
    $ 1.18 - $ 1.18
    $ 1.18
    $ 1.18 - $ 1.18
    $ 1.18

  • DIG Irrigation - 15-030 - 1/2" 16 mm Barbed Fittings Insert Coupling

    DIG Irrigation
    $ 0.29 - $ 0.29
    $ 0.29
    $ 0.29 - $ 0.29
    $ 0.29

    DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

    View full details
    $ 0.29 - $ 0.29
    $ 0.29
    $ 0.29 - $ 0.29
    $ 0.29

Pro tips: Dry-fit PVC before gluing, use primer & cement on sockets (no glue on threads), and flush lines before installing nozzles or emitters. In freezing climates, isolate and winterize. Not sure which parts match your setup? Tell us pipe size, zone GPM, and local code—we’ll point you to the right items.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare